3Com 3C996B-T User Manual page 61

Gigabit server network interface cards
Table of Contents

Advertisement

Parameter
Options
TxDescriptors =
Default = 120
Min = 100
Max = 400
RxFlow =
Default = ON
Selections are:
ON, OFF
TxFlow =
Default = ON
Selections are:
ON, OFF
Slot = n
Speed = n
Default is Auto.
(Note that 1000
FD is only auto-
detected at this
time.
AUTO, 10FD,
10HD, 100FD,
100HD
Link=
Default is FORCE
because the
speed keyword is
usually used
when a switch
and the adapter
speeds are both
forced to a
specific value.
Selections are:
AUTO, FORCE
RxTicks=
Default is 75
Min=0, disabled
Max=5000000, 5
seconds
Units in
microseconds
TxPacketsPer=
Default is
disabled
Min=0
Max=100
Node Address=
NOTE: If you modify any NIC parameters, you must reboot the system before
changes take effect. If you make changes and do not reboot, you may experience
configuration problems. If the driver was loaded at console, however, no reboot is
necessary.
Installing Novell NetWare Server 4.2
Description
Pre-allocates ECB resources on the adapter for transmitting
packets.
Allows enabling/disabling of RxFlow control.
Allows enabling/disabling of TxFlow control.
Identifies the slot number for the specific BCM5700 adapter
currently being configured. This parameter is not necessary if
only a single adapter is installed.
If link negotiation has been disabled, you can select port
speed to be either Auto, 10HD or 10FD, 100HD or 100FD.
Used only to allow the adapter to negotiate a specific or
forced line speed with a switch that is not forced, but instead
setup for auto-negotiation. It is best to allow for auto-
negotiation of the card and switch by not setting this
keyword or the speed keyword. Only use this keyword if
the speed keyword is set to something other than AUTO.
Enables the use of batching receives within a specific
time period.
Enables the use of batching transmits to a specific amount
of packets.
To override the default Media Access COntroller (MAC)
address (also known as the Locally Administered Address),
specify a node address in this field. The expected range is
0060CD000000 through 0060CFFFFFFF.
53

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3c996-sx

Table of Contents