3Com 3C996B-T User Manual page 47

3 Select the desired NIC from the Network Adapters window and click Properties.
The Gigabit Ethernet Controller window opens.
The possible NIC parameter types are:
Flow Control
I
– Disable (default)
– Enable
Speed and Duplex
I
– Auto (default)
– 10 Mb Half
– 10 Mb Full
– 100 Mb Half
– 1000 Mb Full
Jumbo MTU
I
– 1500 (default)
– 2000
– 2500
– 3000
– 3500
– 4000
– 4500
– 5000
– 5500
– 6500
– 7000
– 7500
– 8000
– 8500
– 9000
4 When NIC parameter configuration is complete, click OK to accept the settings.
5 When prompted to restart your computer, click Yes.
The system restarts, using the new configuration settings.
6 When the system returns to proper operation, verify that the adapter port LEDs
operate as described in the table in "Installing and Connecting the NIC" on page 7.
NOTE: If no configuration changes have been made, you can click No to close the
configuration session without restarting your system.
Modifying Configuration Parameters
39