Omron R88M-K Manual page 30

SS2 series
Parameter
No. Parameter name
[hex]
Warning Output
Pn09
Selection
Pn0A to
Not used.
Pn0F
G5 series
Default Parameter
setting No. Parameter name
[dec] [dec]
Output Signal
2 Pn411
Selection 2
- -
Default
setting
[dec]
Select a function to set to the Warning Output
(WARN) output signal (CN1-12, 13 pins) of the
SS2 series.
● The default setting of the SS2 series is 2:
Output for regeneration, overload, or fan
rotation speed alarm warning.
● For the G5 series, use the general-purpose
00020202
hex output 2 for setting. The default setting of
Output Signal Selection 2 (Pn411) is
00020202 hex: Servo Ready Completed
Output (READY).
* If you set the 00090909 hex: Warning Output
1 (WARN), it will function the same as the
Warning Output (WARN) of the SS2.
- -
Remarks
-
30