Page 1
X 3,6-LI a LITHIUM ION CORDLESS SCREWDRIVER Operation and Safety Notes...
Page 2
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. GB / IE / CY Operation and Safety Notes Page...
Introduction The following pictograms are used in these operating instructions / on the device: Read instruction manual! Observe caution and safety notes! Caution – electric shock! Danger to life! Risk of explosion! Nom. no-load speed Volt (AC) Milliamps / Amps / Amp-hours A / Ah Direct current (Type of current and voltage)
General safety advice for electrical power tools 2. Electrical safety To avoid danger to life from electric shock: a) The mains plug on the device must match the mains socket. The plug must not be modified in any way. Do not use an adapter plug with devices fitted with a protective earth.
b) Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. c) Pull the mains plug out of the socket before you make any adjustments to the device, change accessories or when the device is put away.
General safety advice for … / Before first use / Preparing the tool for use hold the electrical power tool by the insulated handle areas only. Contact with a live wire means that the metal parts of the electrical power tools may become live and this can result in an electric shock.
Preparing the tool for use / Maintenance and cleaning / Service / Warranty Lock: Slide the direction of rotation switch the middle position. The ON / OFF switch is now locked. Switching on / off the LED lights Switching on: Press the ON / OFF switch (LED lights) keep it pressed.
(2006 / 95 / EC) Electromagnetic compatibility (2004 / 108 / EC) Type / Appliance Designation: Parkside Lithium ion cordless screwdriver X3.6 - LI A Bochum, 31.08.2009 Hans Kompernaß - Managing Director- We reserve the right to make technical modifications...