Table of Contents
Advertisement
Timer recording
Numbered
buttons
CANCEL
3, 4, 2, 1
ENTER
PROG/CHECK
Auto Renewal Recording
[HDD]
If you record a program onto HDD repeatedly everyday or every
week using timer recording, the unit will record the new program
over the old one.
This function can be used only when weekly recording or
daily recording is selected for "DATE".
≥You cannot set if "MPEG4 Rec mode" ( page 52) is set to
either "SF", "F", "N", or "E".
1
While the timer recording list ( page 27, step 4) is displayed
Press [3, 4] to select the program
and then [ENTER].
2
Press [2, 1] to select
"RENEW".
3
Press [3, 4] to select "ON" and then
[ENTER].
The timer recording list reappears.
[Note]
≥If a program set for Auto Renewal Recording is protected, the program
will not be overwritten. Instead the program set for recording will be
saved as a separate program, and this program will be the one to be
overwritten when the next Auto Renewal Recording takes place.
≥When play back is taking place from the HDD, auto renewal
recording will not be carried out. The program supposed to be auto
renewal recorded will be recorded as a separate program.
≥Play list scenes made from programs that were set for Auto
Renewal Recording are erased along with auto renewal.
≥When there is not enough space on the HDD, the program may not
28
be recorded completely (even if repeating a renewal recording).
RQT6986
DVD
TV
DVD
POWER
TV
HDD
DVD
VCR Plus+ OPEN/CLOSE
INPUT SELECT
TV/VIDEO
1
2
3
CH
4
6
5
VOLUME
7
8
9
CANCEL
0
100
SKIP
SLOW/SEARCH
STOP
PAUSE
PLAY/x1.3
DIRECT NAVIGATOR
PLAY LIST
TOP MENU
MENU
ENTER
FUNCTIONS
RETURN
RETURN
FRAME
CM SKIP TIME SLIP
PROG/CHECK ADD/DLT
ERASE
REC
ADD/DLT
STATUS
MARKER
DUBBING REC MODE
POSITION
DISPLAY
AUDIO
SETUP
MEMORY
TIMER
TIMER
17:36 SP
Remain HDD
RECORDING
No CHANNEL
DATE
ON
OFF
MODE DRIVE CHECK
01
64 ABC WEEKLY TUE
1:00 PM
2:00 PM
SP
02
64 ABC 3/ 26 TUE
2:30 PM
3:00 PM
SP
New Timer Program
MODE DRIVE RENEW
SP
HDD
Check programs
[HDD] [RAM] [DVD-R]
1
Press [PROG/CHECK].
Icon explanations
W The times overlap those in another program.
Note the following if times overlap:
–The program with the earlier start time receives priority.
Recording of the program with the later start time starts when
the earlier program finishes recording.
–If you make two programs with the same start time, the one
you programmed last receives priority.
- You stopped recording of a weekly or daily timer recording. The
icon disappears the next time the timer starts recording.
¥ This program is currently recording.
F The disc was full or the maximum number of programs or
scenes was reached so the program failed to record.
The material was copy-prohibited so it was not recorded.
X The program did not complete recording because the disc is
dirty or some other reason.
≥Programs that failed to record are displayed gray. They are auto-
matically deleted from the timer recording list at 4 a.m. two days
later.
Auto Renewal Recording indicator [HDD]
The program will be automatically recorded over in succession.
Relief Recording indicator
Programs that have been rerouted to the HDD because of
insufficient space.
Recording drive indicator
DVD
1:42 SP
HDD
DVD
3/26 TUE12:55 PM
-- > 6/11
Enable
Message displayed in the CHECK line
Some of the information shown in the CHECK line may not be cor-
rect while you are recording.
Enable:
Displayed if the recording can fit in the remaining space
on the disc.
ON
> (Date): For recordings made daily or weekly, the display will
show as long as recordings can be made (up to a maxi-
mum of one month from the present time) based on the
time remaining on the disc.
! :
It may not be possible to record because of write protec-
tion, because there is no more space left or because the
number of possible programs has reached its maximum.
Please check the HDD and disc.
2
Press [PROG/CHECK] or [RETURN].
The timer recording list disappears.
TIMER
17:36 SP
Remain HDD
DVD
RECORDING
3/26 TUE 12:55 PM
No CHANNEL
DATE
ON
OFF
MODE DRIVE CHECK
01
64 ABC 3/ 26 TUE
1:19 PM
1:22 PM
LP
W
64 ABC
SUN-SAT
2:30 PM
2:40 PM
LP
02
W
03
64 ABC
3/ 25 MON
2:30 PM
3:30 PM
SP
-
04
64 ABC WEEKLY MON 5:00 AM 6:00 AM
LP
05
64 ABC
3/ 26 TUE
9:00 AM
10:00 AM
SP
F
06
64 ABC
3/ 26 TUE
8:00 AM
9:00 AM
SP
X
64 ABC
3/ 26 TUE
10:00 AM
11:00 AM
SP
07
New Timer Program
SELECT
Press ENTER or VCR Plus+ to
CANCEL
store new program.
ENTER
RETURN
1:42 SP
Enable
# 3/31
Overlap
# 3/28
Hide quick links:
Advertisement
Table of Contents
