Table of Contents
Advertisement
When a menu screen appears on
the television
[VCD]
Switch [DVD, TV] to "DVD" and
Press the numbered buttons (0, 1j9) to
select an item.
e.g., "5": [0]
[5]
"15": [1]
[5]
[DVD-A] [DVD-V]
Press [3, 4, 2, 1] to select an item and
press [ENTER].
≥You can also use the numbered buttons (0, 1j9) to select an item.
Other buttons used to operate menus
Read the disc's instructions for further details about operation.
[9][5]: Shows the next menu.
[:][4]: Shows the previous menu.
[RETURN]: Shows the menu screen.
[TOP MENU]: Shows the first menu screen. [DVD-A] [DVD-V]
[MENU]: Shows the menu screen. [DVD-V]
[Note]
≥Discs continue to rotate while menus are displayed. Press [∫]
when you have finished viewing to preserve the unit's motor and
your television screen.
≥If "/" appears on the television, the operation is prohibited by
the unit or disc.
≥Functions available vary from disc to disc.
Position Memory
[HDD] [RAM] [DVD-R] [DVD-A] [DVD-V]
(Effective only when the elapsed play time is displayed)
You can start play from a memorized position even after turning the
unit off.
1
During play
Press [POSITION MEMORY].
The message "Position Memorized" appears on the televi-
sion.
2
After switching the unit to standby and back on
Press [1] (PLAY).
Play starts from the memorized position. (The position is
cleared.)
[Note]
[DVD-R] [DVD-A] [DVD-V]
[VCD]
[CD] [MP3]
≥The position is cleared when you open the disc tray.
[RAM]
≥Positions remain memorized even after the disc tray is opened.
≥You cannot mark positions if the disc is write-protected.
(cartridge
page 10, disc
page 44)
For your reference
If you press [∫] before switching the unit to standby after pressing
[POSITION MEMORY] to memorize a position, play will resume
from the position you pressed [∫] when you press [1] (PLAY).
[VCD]
[VCD]
[CD] [MP3]
Using the Direct Navigator
[HDD] [RAM] [DVD-R]
A list of programs is created as you record them. You can use this
list to find programs to watch.
1
Press
[DIRECT
NAVIGATOR].
The highlighted program
plays in the background.
2
Press [3, 4] to select the program
and press [ENTER].
≥To select with the numbered buttons:
[HDD]
e.g.,
"5": [0]
[0]
"15": [0]
[1]
Play of the images that were playing in the background continues.
To stop play
Press [∫].
To clear the program list
Press [DIRECT NAVIGATOR].
About the program list
Write-protected
Displayed when you have protected
the program.
Copy-protected
Displayed when you have recorded
a program that has copy protection,
from CATV broadcasts, for example.
Unable to play
Displayed if you cannot play the program.
Currently recording
Displayed when the program is being
recorded.
And more...
:Programs that have been rerouted to the HDD [HDD]
( page 27, Relief Recording)
:Programs that allow one copy [HDD]
To erase a program that is being played back
[HDD] [RAM] [DVD-R]
Since the program, any play lists ( page 32) created from
it are erased irretrievably by this procedure, you should be
certain you wish to erase before carrying it out.
1
Press [ERASE].
A confirmation screen will be displayed.
2
Press [2, 1] to select "Erase" and
press [ENTER].
≥On the main unit, press [D, E] and [ENTER].
[Note]
≥It is not possible to erase the program when you are carrying out
chasing play, simultaneous rec and play or time slip play
( page 17). [HDD] [RAM]
≥The amount of space remaining on the disc does not increase
even if you erase programs. [DVD-R]
≥If the confirmation screen disappears before you complete the
operation, start from the beginning again.
e.g., DVD-RAM
DIRECT NAVIGATOR
DVD
No
CH
DATE
TIME
TITLE
EDIT
3
1
01
4
6/20 WED
10 : 00 AM Dinosaur
1
02
6
6/20 WED
9 : 00 PM Auto action
6/20 WED
1
03
13
11 : 00 PM USJ
1
1
3
TOTAL 3
No.
SELECT
0
~
9
RETURN
ENTER
[RAM] [DVD-R]
[5]
"5": [0]
[5]
[5]
"15": [1]
[5]
No
CH
DA
3
6/20
01
4
02
6
6/20
6/20
03
13
X
04
2
6/21
¥
8
05
6/22
3
TOTAL 5
N
0
~
19
RQT6986
Hide quick links:
Advertisement
Table of Contents
