I Connections With An Extension Unit - Panasonic WJ-HD309A Operating Instructions Manual

I Connections with an extension unit

An example of connections is shown below when the unit is used together with an optional extension unit.
This unit can be connected with up to seven extension units.
Connect the EXT IN port on the rear panel of the extension unit and the EXT STORAGE port on the rear panel of this unit using
the cable provided with the optional extension unit.
Important:
• Use the cable provided with the optional extension unit.
• Fix the cables with the cable clamp (provided with each unit) to prevent disconnection or unstable connections that may
cause recording failures or an unstable system.
74
1
3 1
SERIAL
CASCADE
4 2 OUT
2
AUDIO IN AUDIO OUT
MONITOR OUT CASCADE IN MONITOR (VGA)
16 15 14 13 12 11 10
IN
OUT
16 15 14 13 12 11 10
Cable (attached to the extension unit)
EXT
IN OUT
2 1
Cable Clamp
Fixing screw
EXT
Remove this screw from the
IN OUT
2 1
unit and fix the cables with the
cable clamp using the screw
removed from the unit.
How to fix the cable clamp
How to fix the cable clamp
Cable Clamp
Fixing screw
C O P
Y
Remove this screw from the
10 /1 00
BA SE
-T
EX IT
ST O RA
2
G E
1 unit and fix the cables with the
cable clamp using the screw
2
1
removed from the unit.
1 8
MODE
ALARM
2 1
ALARM/CONTROL
DATA RS485(CAMERA) 10/100BASE-T
9 8 7 6 5 4 3 2
9 8 7 6 5 4 3 2
VIDEO
This unit
Extension unit (WJ-HDE300 series)
SIGNAL GND
COPY 1
POWER
EXT STORAGE
1
AC IN
1
SIGNAL GND
POWER
AC IN