Recording (Manual Recording) - Panasonic WJ-HD309A Operating Instructions Manual

RECORDING (Manual Recording)

Do the following to record manually.
Refer to a system administrator about the required settings
for manual recording.
MONITOR1
MONITOR2
R 1 2 3
R
SHIFT SEQ OSD
5 6 7
DISK SELECT COPY TEXT MARK
9 10/0 11
1
EL-ZOOM LOGOUT LOGOUT
2 13 14 15
z
Start recording.
Press the REC button to start recording.
The indicator on the button will light and recording will start.
Images from all the connected cameras will be recorded
with the default setting.
It is possible to record only images displayed on monitor 2
and the VGA monitor by changing the settings.
G Recording Mode and Priority
There are 4 recording modes as follows.
Recording Mode
Emergency Recording
Event Recording
Manual Recording
Schedule Recording
*1: Priorities on the above table are the default settings. (Emergency recording is the highest priority.)
*2: Priorities for manual recording, schedule recording and event recording can be changed. Refer to a system administrator
about the settings.
20
z x
STOP PLAY PAUSE REC - REC STOP
REV
4
PAN/ GOTO
TILT LAST SEARCH
SETUP
PAN/TILT
8 /ESC
SLOW
ZOOM/ A-B
FOCUS REPEAT
–
12 IRIS LISTED
PRESET
/AUTO
16 SET
BUSY
Description
Start recording manually using an external switch at an emergency event occurrence
Recording will be performed automatically at an event occurrence
Start and stop recording manually
Recording will be performed automatically with a designated start/stop time and date
When recording with higher priority than manual recording
is performed, manual recording will not be performed until
this recording finishes.
Refer to the following about the recording mode.
x
Stop recording.
FWD
Press the REC button down for around 2 seconds.
The indicator on the button will go off and recording will
+
stop.
Notes:
316
• The camera selection button will light orange (currently
recording) or blue (currently being recorded and dis-
played on the monitor) to indicate which camera is
being recorded.
• When recording with other recording modes being per-
formed, the indicator on the REC button will not go off
even though the REC button is pressed to stop manual
recording.
• Manual recording will be stopped for a camera channel
when the supply of the video input signals to the cam-
era channel is stopped. When the supply of the video
input signals to the camera channel is resumed, manual
recording will be performed automatically.
*1
Priority
Highest
*2
1
*2
2
*2
3