Panasonic WJ-HD309A Operating Instructions Manual page 109

QUAD1 - 4: Displays live images from camera channels 1 -
4 on a 4-split screen.
QUAD5 - 8: Displays live images from camera channels 5 -
8 on a 4-split screen.
QUAD9 (only for the WJ-HD309A): Displays an image
from camera channel 9 on the upper left area on a 4-
split screen.
QUAD9 - 12 (only for the WJ-HD316A): Displays live
images from camera channels 9 - 12 on a 4-split
screen.
QUAD13 - 16 (only for the WJ-HD316A): Displays live
images from camera channels 13 - 16 on a 4-split
screen.
9SCREEN (only for the WJ-HD309A): Displays an image
from camera channel 1 - 9 on a 9-split screen.
9SCREEN1 - 9 (for the WJ-HD316A): Displays images
from camera channels 1 - 9 on a 9-split screen.
9SCREEN10 - 16 (only for the WJ-HD316A): Displays
images from camera channels 10 - 16 on a 9-split
screen.
16SCREEN (only for the WJ-HD316A): Displays images
from camera channels 1 - 16 on a 16-split screen.
SEQ: Images will be displayed in the sequential display.
8 Camera Partitioning
Select a controllable range for each camera channel from
the following.
View/Operate: Displaying live images and operating the
camera are possible.
View: Displaying live images is possible but cameras can-
not be operated.
--: Both displaying live images and operating camera are
impossible.
G [Host Edit] Correction of the registered host
information
It is possible to edit the registered host information.
Move the cursor to "Host IP Address" and rotate the jog dial
to select the host IP address.
The registered information will be displayed.
Editing can be performed in the same way as registration.
(Refer to page 108.)
Move the cursor to "EDIT" at the lower right on the menu
and press the SET button to complete editing.
SETUP MENU
System Recording
Advanced
Switcher Display
I
Host IP Address
Basic Setup
I
Level
Time & Date
I
Priority
I
User Regist. Default Screen
I
Camera Partitioning
User Edit
CAM1
User Delete
CAM2
Host Regist. CAM3
CAM4
Host Edit
CAM5
CAM6
Host Delete
CAM7
User Level
CAM8
Save/Load
Quick Menu
Event Schedule
LIVE
Comm Maintenance
000 . 000 000 000 . .
LV1
16
16 SCREEN
View/Operate CAM9 View
View/Operate CAM10 View
View/Operate View
CAM11
View/Operate CAM12 --
View/Operate CAM13 --
View/Operate CAM14 --
View/Operate CAM15 --
View/Operate CAM16 --
EDIT
G [Host Delete] Deletion of a registered host
It is possible to delete a registered host.
Move the cursor to "Host Delete" and rotate the jog dial to
select the host. Move the cursor to "DELETE" and press the
SET button.
The selected host will be deleted.
SETUP MENU
System Recording
Advanced
Switcher Display
I
Host IP Address
Basic Setup
Time & Date
User Regist.
User Edit
User Delete
Host Regist.
Host Edit
Host Delete
User Level
Save/Load
Quick Menu
G [User Level] Setting of the operation level
Set operable functions at each user level (LV 1/LV 2/
LV 3).
Rotate the jog dial to display "b" to enable operation.
Leave it blank to disable operation.
Refer to the table on the next page for each function.
The default settings are shown as below.
SETUP MENU
System Recording
Advanced
Switcher Display
Basic Setup
Time & Date
Setup
Setup Status
User Regist.
Camera Setup
Event Log Status
User Edit
Access Log Status
User Delete
Error Log Status
Alarm Reset
Host Regist.
Alarm Suspended Time
Host Edit
Copy
Normal Recording Erase
Host Delete
Event Recording Erase
User Level
Manual REC Operation
Playback Operation
Save/Load
N/W Access
Quick Menu
Each parameter of the user level is as follows:
LV1: Possible to perform all the operations (Administrators)
LV2: Possible to refer the settings of the unit and the
access log, and to perform the alarm reset (Head of
operators)
LV3: Possible to monitor or play the images (Operators)
Event Schedule
LIVE
Comm Maintenance
0. 0. 0. 0
DELETE
Event SChedule
LIVE
Comm Maintenance
LV1 LV2 LV3
109