Programmable Settings; Programming Guidelines - Panasonic KX-TG2355 Operating Instructions Manual

Programmable Settings

Programming Guidelines

This unit has several programmable functions which can be selected from the
function menu on the display (p. 13).
How to select a function item from the menu
Make sure the handset and the base unit are not being used. The handset
must be operated near the base unit and while off the base unit.
Press [MENU].
1
• The main menu is displayed (p. 13).
Scroll to the desired item by pressing [d] or
2
[B].
Press Select to select the desired item.
3
If the item has a sub-menu, select the menu item (p. 13). Repeat steps
4
2 and 3 until the desired item is displayed. If the item has no sub-menu,
go to step 5.
Select the desired setting by pressing [d] or
5
[B], then press Save to save your setting.
• A confirmation tone will be heard and the setting
will be saved.
Press [OFF] to exit programming mode.
6
• To go back to the previous menu, press Back, or press Select while
"---(Go back)----" is displayed. If you press this key in the main menu, the
unit will exit programming mode.
• After programming is complete, the display will return to the main menu or the
sub-menu depending on which menu the selected item is located. (See the menu
table on page 13.)
• You can exit programming mode at any time by pressing [OFF].
• If you do not press any buttons for 60 seconds, the handset will exit programming
mode.
• If the unit detects a problem, an error message will be displayed (p. 68) and/or
error beeps will sound.
12
Handset enters t he