Directory Search Dialing (Direct Transmission) - Panasonic DP-135FP Operating Instructions Manual

Sending Documents

Directory Search Dialing (Direct Transmission)

Directory Search Dialing allows you to dial a full telephone
number by searching the station's name.
(To use Direct Transmission, you must change the Fax
Parameter No. 05 (MEMORY) setting to "OFF" in advance.
(See page 35 and Note 1 below)
Make sure that the FAX Mode indicator is ON. If not, press
1
a
1
b
2
-
repeatedly until the display shows the station name you
want to send to.
3
START
The full number (e.g. 5551234) will be dialed.
ADF Scanning
4
The machine starts to dial the telephone number.
a
Platen Glass (Flatbed) Scanning
4
When an original is placed on the Platen Glass,
b
the display is as shown to the right.
Press or
Platen Glass and press
NOTE
1. After the Direct Transmission is completed, reset the Fax Parameter No. 05 (MEMORY) setting to "ON" (factory
default position).
Set the original(s) face up on the ADF.
Place a book or an original face down on the
Platen Glass.
+ -
or
to select the size of the original on the
to start dialing.
START
(see Note 1)
-
FAX
to select the "FAX MODE".
FAX
ENTER STATION
OCT-12-2000 15:00
PANASONIC
5551234
+
* DIALING *
ORIGINAL=LETTER
PRESS START
* DIALING *
PANASONIC
1 2 3
4 5 6
abc..
7 8 9
- +
0
START
+
00%
53