Panasonic DP-135FP Operating Instructions Manual page 36

PROGRAMMING YOUR MACHINE
Fax Parameters
No. Parameter
34 ENERGY SAVE TIMER
SLEEP DELAY TIMER
35 DAYLIGHT TIME
36 RING PATTERN
(See Note 2)
37 RCV TO MEMORY
39 PIN CODE ACCESS
52 DIAGNOSTIC
PASSWORD
53 SUB-ADDRESS
PASSWORD
Continued on the next page.
36
Setting
Number
1
*2
3
4
5
6
7
8
1
*2
3
4
5
6
1
*2
*1
(DRD)
2
*1
2
3
Setting
5 min. To reduce the power consumption in standby, your machine is
designed to power down to the Energy Saver Mode and Sleep
15
Mode after a specified period of inactivity. You may change the
delay time to enter into each mode as required.
30
60
Energy Saver Mode: Saves energy by consuming less power than
90
120
Sleep Mode:
180
240
5 min.
30
60
90
180
240
Invalid Selecting whether the clock adjusts for Daylight Saving Time
automatically. The built-in clock will advance 1 hour at 2:00 am on
the first Sunday in April and fallback 1 hour at 2:00 am on the last
Valid
Sunday in October.
Invalid All ring patterns.
Valid Select a ring pattern for automatic answering.
1: A Standard ring pattern.
2: B Double ring pattern.
3: C Triple ring pattern (Short-Short-Long).
4: D All other triple ring pattern, except the type C
described above.
Enter a 4-digit password used to print out the received document
in memory by using F8-2 (RCV TO MEMORY). When F8-2 is set
(----)
to On, this parameter will not be shown on the LCD display. (See
page 67)
None Selecting the access method (Prefix or Suffix) to dial a number
with PIN Code. (See page 72)
Suffix
Prefix
Setting the password for Remote Diagnostic Mode. Please ask
(----)
your Panasonic Authorized Dealer for details.
Setting a 20-digit password for secured sub-address
(----)
communication.
Comments
when in standby mode by turning off the fuser
unit after a specified time.
This is the lowest power state the machine
enters after the specified time without
actually turning off.