Collector Removal - Briggs & Stratton LT 125 Operator's Manual

Collector Removal

: Operation Without Bagger
CAUTION
For operation without bagger, the mower defl ector MUST
be properly installed in the down position and retained by
the spring latch.
1. Lift up cover (A, Figure 16), then remove and empty bags
(B).
2. Remove hitch and frame assembly (C) from rear of
tractor.
D
H
G
Figure 16
E
F
I
3. Loosen middle tube strap from lower chute (D) and
remove middle / upper tube assembly (E).
4. Lift discharge defl ector (F). Rotate latch (G) upward on
front of lower chute.
5. Remove mounting strap (H) from shoulder bolt (I) and
pull lower chute away from mower.
B
A
C
13
Operation