Onkyo TX-DS474 Instruction Manual page 25

Recording a source
1
STANDBY/ON
STANDBY
POWER
SCAN GROUP PRESET
HIGH CURRENT DISCRETE OUTPUT STAGE AMPLIFIER
ON OFF
A SPEAKERS B SURROUND MODE
MUL TI CH INPUT DVD VIDEO 1 VIDEO
PHONES
2
1·3
VCR
(VIDEO-2)
2
VIDEO 1
3
1
STANDBY/ON
STANDBY
POWER
SCAN GROUP PRESET
HIGH CURRENT DISCRETE OUTPUT STAGE AMPLIFIER
ON OFF
A SPEAKERS B SURROUND MODE
PHONES MUL TI CH INPUT DVD VIDEO 1
1·5
VDP, VCR, DVD (VIDEO-1)
2·5
VCR (VIDEO-2)
3
VIDEO
4
FM AM
MASTER VOLUME
PARAMETER SELECTOR
PARAMETER CONTROLLER
TUNING
MIDNIGHT THEATER DIMMER MEMORY FM MUTE / MODE
CLEAR
BASS TREBLE
2 TAPE( MONITOR ) FM AM PHONO C D
474
AUDIO VIDEO CONTROL RECEIVER TX-DS
1·3
VDP, DVD player
(VIDEO-1)
DVD
or
4
MASTER VOLUME
PARAMETER SELECTOR
PARAMETER CONTROLLER
TUNING
MIDNIGHT THEATER DIMMER MEMORY FM MUTE / MODE
CLEAR
BASS TREBLE
VIDEO 2 TAPE( MONITOR ) FM AM PHONO C D
AUDIO VIDEO CONTROL RECEIVER TX-DS 474
Turntable
CD player
1
C D
PHONO
Recording data from a video disc player (or a
video camcorder) to VCR
Video disc programs can be recorded onto a VCR (VIDEO-2).
1. Load a disc in the video disc player or DVD player, and
insert a blank tape in the VCR (VIDEO-2).
2. Press the VIDEO-1 or DVD button.
3. Start playing the video disc player and recording on the
VCR.
Refer to the Video equipment connections section on the page 7.
Adding new sound to a video tape during video
editing
During video tape editing, you can add sound to the recording
VCR from various audio program sources.
1. Insert the disc or tape that you want to record into the
player connected to VIDEO-1.
2. Insert a blank video tape in the VCR connected to VIDEO-2.
3. Press the VIDEO-1 button.
4. Select the audio program source (FM, AM, PHONO, CD).
5
5. Start playing the video connected to the VIDEO-1 terminal
and start playing the sound source. Then, start recording on
the VCR that is connected to the VIDEO-2 terminal.
Refer to the video disc player, video camcorder, DVD or VCR
instruction manuals for additional information.
25