Onkyo TX-DS575x Instruction Manual
Onkyo TX-DS575x Instruction Manual

Onkyo TX-DS575x Instruction Manual

Onkyo a/v receiver instructions manual
Hide thumbs Also See for TX-DS575x:

Advertisement

AV Receiver
TX-DS575X
Instruction Manual
Thank you for purchasing the Onkyo AV Receiver.
Please read this manual thoroughly before making
connections and turning on the power.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new AV Receiver.
Please retain this manual for future reference.
Contents
Before using
Important Safeguards........................ 2
Precautions ....................................... 3
Features............................................. 4
Supplied accessories......................... 4
Before operating this unit ................. 5
Preparation
Connecting other devices ................. 8
Connecting speakers....................... 10
Positioning speakers ....................... 11
Connecting the power..................... 11
Operation
Speaker setup.................................. 14
Selecting a sound source ................ 17
Using Listening Mode .................... 21
Tuning in a radio station................. 24
(European models only)............... 27
Recording a source ......................... 29
RC-392M ..................................... 34
Using a Macro function .................. 36
Appendix
Troubleshooting guide.................... 40
Specifications ................................. 41
Control guide

Advertisement

Table of Contents
loading

Summary of Contents for Onkyo TX-DS575x

  • Page 1: Table Of Contents

    AV Receiver TX-DS575X Instruction Manual Thank you for purchasing the Onkyo AV Receiver. Please read this manual thoroughly before making connections and turning on the power. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver.
  • Page 2: Important Safeguards

    WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
  • Page 3: Precautions

    3. AC Fuse The fuse is located inside the chassis and is not user-serviceable. If power does not come on, contact your Onkyo authorized service station. 4. Care From time to time you should wipe the front and rear panels and the cabinet with a soft cloth.
  • Page 4: Features

    FM antenna 1 Available for worldwide models. Conversion plug 1 Use this plug if the power cord plug of the TX-DS575X does not fit your AC outlet. (Shape may vary depending on the area which it was purchased.)
  • Page 5: Before Operating This Unit

    REMOTE CONTROL VIDEO 1 FRONT 10kHz 9kHz (PLAY) SURROUND AM FREQUENCY MONITOR STEP AV RECEIVER TAPE MODEL NO. TX-DS575X SUBWOOFER PRE OUT CENTER WOOFER (REC) 220-230V 120V MULT I CH I NPUT VOLTAGE SELECTOR PHONO 220-230V VOLTAGE SELECTOR Remote control sensor STANDBY indicator 30˚...
  • Page 6: Audio Equipment Connections

    SPEAKERS COAXIAL 1 OPTICAL 2 OPTICAL 1 AC OUTLETS REMOTE CONTROL AC 230V 50Hz SWITCHED TOTAL 100W MAX. AV RECEIVER TX-DS575X Do not plug in the power cord until all connections have been made. : signal flow To wall outlet...
  • Page 7: Video Equipment Connections

    COAXIAL 1 FRONT SPEAKERS OPTICAL 2 OPTICAL 1 CENTER SPEAKER FRONT SURROUND MONITOR AV RECEIVER MODEL NO. TX-DS575X SUBWOOFER PRE OUT CENTER WOOFER MULT I CH I NPUT S-VIDEO IN S-VIDEO OUT VIDEO IN S-VIDEO IN VIDEO IN Monitor TV...
  • Page 8: Connecting Other Devices

    Monaural audio cable (mono) SUBWOOFER OUT CENTER OUT FRONT OUT DIGITAL INPUT FRONT SURROUND COAXIAL 2 SPEAKERS SPEAKERS COAXIAL 1 OPTICAL 2 OPTICAL 1 AC OUTLETS REMOTE CONTROL AC 230V 50Hz SWITCHED TOTAL 100W MAX. AV RECEIVER MODEL NO. TX-DS575X...
  • Page 9 They both offer the same functionality. You can use the remote controller for the TX-DS575X to control a Onkyo DVD player or MD recorder that is not connected via an cable. When you control such a...
  • Page 10: Connecting Speakers

    – – FRONT SPEAKERS CENTER SPEAKER FRONT SURROUND MONITOR AV RECEIVER TX-DS575X MODEL NO. SUBWOOFER PRE OUT CENTER WOOFER MULT I CH I NPUT – + Center Speaker When you use only one speaker or wish to listen to monaural (mono) sound, a single speaker should never be connected in parallel to both the right and left channel terminals simultaneously.
  • Page 11: Positioning Speakers

    Standby mode. 3. STNBY button Turning the power on from the remote controller: 1. Press the POWER switch of the TX-DS575X to turn on the power to the unit. 2. Press the MODE AUDIO button. 3. Press the ON button to turn on the power to the TX- DS575X, or press the STNBY button to set the receiver in standby mode.
  • Page 12: Making Antenna Connections

    Making antenna connections Slit C To TX-DS575X Insert into the hole. Outdoor Indoor antenna antenna Connecting the 300 ohm ribbon wire: Loosen the screws and wrap the wire around these screws. Then 300 ohms tighten the screws with a screwdriver.
  • Page 13 Making antenna connections U.S. and Canadian Other models models ANTENNA ANTENNA ANTENNA Connecting the included antennas Connecting the FM indoor antenna: The FM indoor antenna is for indoor use only. Extend the antenna and move it in various directions until the clearest signal is received.
  • Page 14: Speaker Setup

    Speaker setup Follow the steps below before you start operating the unit. SP / SYS SETUP ENTER ENTER / SCAN ENTER ENTER / SCAN PRESET / MODE ADJ DOW N PRESET / MODE ADJ DOW N PTY/TP POWER DISPLAY Setting the CONFIG parameters Set whether a speaker is used or not, and set the size of the con- nected speakers.
  • Page 15 Speaker setup PRESET / MODE ADJ DOW N PRESET / MODE ADJ DOW N SP / SYS SETUP ENTER ENTER / SCAN SP / SYS SETUP (ENTER) ENTER / SCAN meter PRESET / MODE ADJ DOW N PRESET / MODE ADJ DOW N PRESET / MODE ADJ DOW N...
  • Page 16 Speaker setup 3. CH SEL button Using the Test Tone function on the main unit 1. Press the SP/SYS SETUP button. 2. Press the ENTER/SCAN or ENTER button while “SPEAKER SETUP” appears on the display. 3. Press the SP/SYS SETUP button twice while “CONFIG SETUP” appears on the display. 4.
  • Page 17: Selecting A Sound Source

    (Refer to page 20 for more details.) 3. INPUT SELECTOR button Use this button to select a desired sound source. (V4 button is not used for this TX-DS575X.) 4. Select a Listening mode. (Refer to page 21) MASTER VOLUME 6. Use the bass, treble controls to adjust the tone.
  • Page 18: Assigning Digital Input

    OPTICAL 1 any digital signals from the digital input jacks (Dolby digital, DTS, etc.). OPT1 — The TX-DS575X plays back a digital signal input from the OPTICAL 1 jack. OPT2 — The TX-DS575X plays back a digital signal input from the OPTICAL 2 jack.
  • Page 19 Selecting a sound source LEFT CENTER SUBWOOFER L-SURROUND SP/SYS SETUP ENTER ENTER / SCAN PRESET / MODE ADJ DOW N MASTER VOLUME When Multi channel input is selected as a source Follow the steps below to adjust the level of each speaker if you have selected MULTI CH INPUT.
  • Page 20 Selecting a sound source Speakers selector (SPEAKERS A, B) SPEAKERS A: This button turns on or off the speakers connected to the FRONT SPEAKERS A, CENTER SPEAKER, SURROUND SPEAKERS and SUBWOOFER terminals. When you listen to surround audio or select Multi CH INPUT, be sure to turn on SPEAKERS A.
  • Page 21: Using Listening Mode

    DTS source, a short noise may be heard. This is not a mal- function. 4. The DTS indicator on the TX-DS575X lights up while it plays the DTS source. When playback concludes and the DTS signal transmission stops, the TX-DS575X remains in DTS mode and the DTS indicator remains lit.
  • Page 22 To play a Dolby digital or DTS Surround source, you need to connect the sound source using the digital input connector. When you play the Dolby Digital or DTS Surround source, the TX-DS575X automatically enters Dolby Digital Surround (ste- reo) or DTS Surround (stereo) mode respectively. 1. Press the MODE...
  • Page 23 Using Listening Mode Main unit operation: 1. Press the CH LEVEL button. 2. Press the PRESET/MODE ADJ √/® buttons to adjust the level. 3. Press the ENTER/SCAN or ENTER button to select a speaker. Setting the Listening mode parameters The following parameters are available for each Listening mode. Dolby Digital LATE NIGHT FRONT EFFECT...
  • Page 24: Tuning In A Radio Station

    At this time, the station will be in mono and interstation noise will be heard. Select the station to which you want to listen. DISPLAY button Pressing the DISPLAY button each time will change the indication as follows: Frequency (preset No.) MASTER VOLUME BASS TREBLE TX-DS575X AV RECEIVER Listening mode...
  • Page 25: Using Preset Radio Stations

    Re -EQ CONTROL BASS TREBLE TAPE PHONO TX-DS575X AV RECEIVER ENTER/SCAN Programming radio stations 1. Select the frequency that you want to store in the memory. (See Tuning in a radio station on page 24.) 2. Press the MEMORY button.
  • Page 26 Using preset radio stations 1, 2 Remote controller MEMORY ENTER ENTER / SCAN Selecting a preset station PRESET / MODE ADJ DOW N 1. Select the tuner as the source by pressing the AM or FM input selector button on the main unit. 2.
  • Page 27: Receiving Rds Broadcasts (European Models Only)

    NOTE: In some cases, the characters displayed on the TX-DS575X’s dis- play may not be exactly the same as the ones broadcast by the radio station. Unusual characters may appear on the display if the TX- DS575X receives characters that cannot be displayed correctly.
  • Page 28: European Models Only

    RT information. When the information is received, the characters will scroll across the display. Listening mode If “No text” appears on the display for 3 seconds, RT informa- tion is not available. MASTER VOLUME BASS TREBLE TX-DS575X AV RECEIVER...
  • Page 29: Recording A Source

    BASS TREBLE record. PHONO AV RECEIVER TX-DS575X If you select DVD, VIDEO 1, VIDEO 2 or VIDEO 3, only the audio will be recorded. If you select FM or AM, set the tuner to the station you want to record.
  • Page 30 BASS TREBLE VIDEO 3 TAPE PHONO TX-DS575X AV RECEIVER 2. Insert a blank video tape in the VCR connected to VIDEO 1. 3. Press the VIDEO 2 or 3 button. 4. Select the audio program source (TAPE, FM, AM, PHONO, Turntable 5.
  • Page 31: Using The Remote Controller

    When you use a remote controller, typically you press one of the MODE buttons that corresponds to the device you wish to control, then press the operation buttons. For example, if you wish to control the TX-DS575X from a remote controller, first press the MODE AUDIO but- ton, then press an appropriate operation button.
  • Page 32 Numeric keys operation buttons Numeric keys, ENT button Controlling an Onkyo CD player Note: First connect an Onkyo CD player using the 1. Press the MODE CD button. 2. Press the desired CD operation button. CD operation buttons TRACK DISC EJECT...
  • Page 33 You may also use the following buttons: VOL q/u MUTING Controlling an Onkyo tape deck Note: First connect an Onkyo tape deck using the page 9.) 1. Press the MODE AUDIO/TAPE button. 2. Press the desired tape deck operation button. TAPE operation buttons...
  • Page 34: Programming The Remote Controller Codes Of Other Devices Into The Rc-392M

    7. Operate the programmed button to make sure the learning function works. Note: The remote controller codes for the Onkyo CD player, tape deck, DVD player, and MD recorder have already been pro- grammed into the buttons on the RC-392M. You may program other remote controller codes into these buttons.
  • Page 35 Programming the remote controller codes of other devices into the RC-392M See page 39 for information on how to erase the learned codes from all buttons. SEND/LEARN indicator SEND/LEARN indicator Erasing a learned code You can erase a learned code. You cannot erase preset codes. Erasing a code programmed in a button 1.
  • Page 36: Using A Macro Function

    A Macro function enables you to program a series of button operations on the remote controller into a single button. For example, you need to follow the steps below to play a CD player connected to the TX-DS575X without using the Macro function: 1: Press the MODE AUDIO button.
  • Page 37 The SEND/LEARN indicator flashes twice slowly. 4. Check to see if the button has been programmed correctly. Point the RC-392M toward the TX-DS575X and press the MACRO DIRECT button, and make sure that the device responds as programmed. Transmitting the codes in Macro mode takes a while. During transmission, point the remote controller toward the device to be controlled.
  • Page 38 Using a Macro function 1, 2 Erasing a learned remote controller button oper- ation from the MACRO MODE buttons 1. Press and hold down the corresponding MODE button and press the MACRO MODE button, then release the buttons. When you press the MODE button, the SEND/LEARN indica- tor lights up.
  • Page 39 Using a Macro function Erasing all codes and operations programmed in the buttons This procedure will erase all remote controller codes for the other devices and all macro operations that have been programmed in the RC-392M (see pages 34, 36 and 37). 1.
  • Page 40: Troubleshooting Guide

    Turn the power button off and then on again or remove the AC plug from the outlet and then plug it again. Contact your Onkyo Service Center. Press the MUTING button on the remote con- troller to turn it off.
  • Page 41: Specifications

    Specifications AMPLIFIER SECTION Continuous Average Power output (FTC) All channels: 70 watts per channel min. RMS at 8 ohms, 2 channels driven from 20 Hz to 20 kHz with no more than 0.08% total harmonic distortion. 90 watts min. RMS at 6 ohms, 2 chan- nels driven from 1 kHz with no more than 0.1% total harmonic distortion.
  • Page 42: Control Positions And Names

    CH LEVEL MODE PRESET / MODE ADJ DOW N ENTER / SCAN LATE NIGHT / LFE LEVEL FRONT EFFECT Re -EQ CONTROL BASS TREBLE PHONO TX-DS575X AV RECEIVER g h i DS P STEREO TUNED FM MUTE FM STEREO MEMORY DIRECT...
  • Page 43 TX-DS575X.] 10. TRACK button [32] 11. CD/TAPE/DVD/MD operation buttons [31~33] 12. Input Selector buttons [17] The V4 button is not used for the TX-DS575X. 13. Numeric key/STEREO/DSP A, B/CH SEL/LEVEL+,–/DIMMER buttons [31~33] [The DIRECT button and THX* button are not used for the TX-DS575X.]...
  • Page 44 Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8111 Fax: 072-833-5222 http://www.onkyo-intl.com ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.onkyousa.com ONKYO EUROPE ELECTRONICS GmbH Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: 089-849-320+49-8142-4401-0 Fax: +49-8142-4401-555 http://www.onkyo.net...

Table of Contents