Recording A Source - Onkyo TX-DS474 Instruction Manual

Recording a source

1
STANDBY/ON
POWER
ON OFF
MUL TI CH INPUT
PHONES
1·3
Tape deck
(TAPE)
2
DVD
FM
24
2
PARAMETER SELECTOR
STANDBY
PARAMETER CONTROLLER
SCAN GROUP PRESET TUNING
HIGH CURRENT DISCRETE OUTPUT STAGE AMPLIFIER
A SPEAKERS B SURROUND MODE MIDNIGHT THEATER DIMMER MEMORY FM MUTE / MODE
CLEAR
BASS
DVD VIDEO 1 VIDEO 2 TAPE( MONITOR ) FM AM PHONO C D
AUDIO VIDEO CONTROL RECEIVER
Turntable
CD player
VCR, VDP
DVD
VIDEO 1 VIDEO 2
C D
AM PHONO
TAPE ( )
MONITOR
Recording an audio source
Make all connections between the tape deck and the receiver as
shown in the "Audio equipment connections" diagram (page 6).
MASTER VOLUME
1. Insert a blank tape into the tape deck.
2. Press the input selector button for the source you want to
TREBLE
record.
If you select DVD, VIDEO-1 or VIDEO-2, only the audio will
TX-DS 474
be recorded.
If you select FM or AM, set the tuner to the station you want to
3
record.
3. Set the tape deck in recording mode. Start playing the
source.
Set the proper recording level using the controls on the tape
deck.
Please read the corresponding instruction manuals for more
information on how to operate the corresponding equipment.
Monitoring
If the tape deck has three heads, the signal just recorded can be
monitored:
Press the TAPE (MONITOR) button. The TAPE MONITOR indi-
cator appears on the display.
To stop monitoring, press the TAPE (MONITOR) button again.
The TAPE MONITOR indicator turns off.
You cannot use the monitor function with the MULTI-CH
INPUT button turned on.
Refer to the tape deck's instruction manual for more details.