Table of Contents
Advertisement
Contents
Connections
No sound comes out
No sound comes out of speakers.
Check the connections for all devices. (v p. 18)
0
Insert connection cables all the way in.
0
Check that input connectors and output connectors are not reversely connected.
0
Check cables for damage.
0
Check that speaker cables are properly connected. Check that cable core wires come in contact with the metal part on speaker terminals. (v p. 19)
0
Securely tighten the speaker terminals. Check speaker terminals for looseness. (v p. 19)
0
Check that the proper input source is selected. (v p. 33)
0
Adjust the volume. (v p. 34)
0
Cancel the mute mode. (v p. 34)
0
Check that the correct input source is selected when audio is being input to this unit from an external device. (v p. 33)
0
Check the digital audio output setting on the connected device. The initial settings may be off depending on the device.
0
Make sure that the settings for the speakers that output audio are appropriate. (v p. 33)
0
Do not input non-PCM signals, such as Dolby Digital, DTS and AAC. This causes noise and could damage the speakers.
0
To playback via a Bluetooth connection, perform pairing between this unit and the Bluetooth device. (v p. 36)
0
Front panel
Rear panel
Playback
Settings
78
Remote control
unit
Tips
Index
Appendix
Advertisement
Table of Contents
