Denon PMA-900HNE Owner's Manual page 38

Contents Connections
Pairing with other Bluetooth devices
Pair a Bluetooth device with this unit.
1
Activate the Bluetooth settings on your Bluetooth
device.
2
Press and hold Bluetooth on the remote control unit for
at least 3 seconds.
This unit will go into the pairing mode.
3
Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.
0 This unit can be paired with a maximum of 8 Bluetooth devices. When a 9th
Bluetooth device is paired, it will be registered in place of the oldest registered
device.
NOTE
0 To operate the Bluetooth device with the remote control of this unit, the Bluetooth
device needs to support the AVRCP profile.
0 The remote control of this unit is not guaranteed to work with all Bluetooth devices.
0 Depending on the type of Bluetooth device, this unit outputs audio that is coupled
to the volume setting on the Bluetooth device.
Front panel Rear panel
Playback Settings
Reconnecting to this unit from a
Bluetooth device
After pairing is completed, the Bluetooth device can be connected without
performing any operations on this unit.
This operation also needs to be performed when switching the Bluetooth
device for playback.
1
2
3
4
0 When the power of this unit and the Bluetooth function of this unit are turned on,
the input source will be automatically switched to "Bluetooth" if a Bluetooth device
is connected and is played.
0 When the "Network Control" setting of this unit is set to "On" and a Bluetooth
device is connected and is played with the unit in the standby state, the power of
the unit will be turned on automatically. (v p. 68)
38
Remote control
unit
Tips
If a Bluetooth device is currently connected, deactivate
the Bluetooth setting of that device to disconnect it.
Activate the Bluetooth setting of the Bluetooth device
to be connected.
Select this unit from the Bluetooth device list on your
Bluetooth device.
Play music using any app on your Bluetooth device.
Index
Appendix