Table of Contents
Advertisement
Contents
Connections
Power does not turn on / Power is turned off
Power is not turned on.
Check whether the power plug is correctly inserted into the power outlet. (v p. 30)
0
This unit is in standby mode. Press the X button on the unit or the AMP POWER X button on the remote control. (v p. 32)
0
Power automatically turns off.
The sleep timer is set. Turn on the power again. (v p. 60)
0
"Auto-Standby" is set. "Auto-Standby" is triggered when there is no operation for a set amount of time. To disable "Auto-Standby", set "Auto-Standby"
0
on the menu to "Off". (v p. 66)
The power turns off and the protection circuit indicator shows one long blink and two short blinks in red.
Stop playback on the playback device, and then turn the power off and on again.
0
If the problem is not solved by turning the power off and on again, this unit's amplifier circuit has failed. Unplug the power cord and contact our customer
0
service center.
The power turns off and the protection circuit indicator shows one long blink and three short blinks in red.
This unit's power circuit has failed. Unplug the power cord and contact our customer service center.
0
Front panel
Rear panel
Playback
Settings
75
Remote control
unit
Tips
Index
Appendix
Advertisement
Table of Contents
