Denon PMA-900HNE Owner's Manual page 70

Contents Connections
Connecting by using the WPS
button on the router
If you are using a wireless router that supports WPS (Wi-Fi Protected
Setup™), connect to the network with the "push button method". (Wi-Fi
Protected Setup™ is trademarks of Wi-Fi Alliance.)
1
Press the WPS button on your router.
2
Within 2 minutes, press and hold the CONNECT button
on the remote control for 5 seconds.
"WPS Connecting" is shown on the display and the connection is
started.
When connected, "WPS Connected" is shown on the display.
0
Front panel Rear panel
Playback Settings
70
Remote control
unit
Tips
Index
Appendix