Table of Contents
Advertisement
Contents
Connections
Switching the display's brightness
The display brightness can be adjusted between four levels. Switching the
display off reduces a source of noise that affects sound quality, enabling
higher sound quality playback.
1
Press DIMMER.
The brightness of the display switches each time the button is
0
pressed.
0 If the buttons are operated when the display is turned off, information is displayed
temporarily.
0 The display brightness is set to most brightly by default.
Front panel
Rear panel
Playback
Settings
Using the sleep timer
You can have the power automatically switched to standby once a set time
has elapsed. This is convenient for listening while going to sleep.
1
o To cancel the sleep timer
1
0 The sleep timer setting is canceled when the unit switches to standby mode.
0 To check the time remaining until the sleep timer is activated, press SLEEP.
60
Remote control
unit
Tips
Press SLEEP during playback and select the setting
time.
The sleep timer can be set to up to 90 minutes, in steps of 10
0
minutes.
After about 5 seconds, the setting is entered and the display
0
returns to as it was before.
Press SLEEP to set "Sleep Off".
Index
Appendix
Advertisement
Table of Contents
