Table of Contents
Advertisement
36 | DR 10s | Introduction to the DR Detector
Messages
Under certain conditions the DR Detector shows a dialog box containing a
message in the middle of the screen of the NX workstation. This message
informs the user that either a problem has occurred or that a requested action
cannot be performed. The user must read these messages carefully. They will
provide information on what to do from then on. This will be either
performing an action to resolve the problem or to contact the local service
organization. Details on the contents of messages can be found in the service
documentation which is available to local service personnel.
Related Links
Problem solving
Detector Status Indicators
0351A EN 20190319 1349 *
on page 93
on page 82
Advertisement
Table of Contents
