Turning Off - Mio DigiWalker A501 User Manual

NOTE:
To avoid accidental operations after waking up the device from the suspend mode,
you can enable the auto-lock function by tapping
Power
The device will not enter the suspend mode when using the navigation program (for
selected models only). In such cases, the device's standby time will decrease
without using external power. Therefore, you are advised to exit the navigation
program properly when the program is not needed any more.

Turning Off

If you are not using the device, press and hold the Power button ( ) for 3
seconds to turn the device off.
Getting Started
Advanced and selecting Auto lock when device turns off
Settings System
ok.
1-11