Mio DigiWalker A501 User Manual page 156

4. Select one of the following:
By Internet
Select the server you want to connect to. Tap the arrow next to the
server name to open the drop-down list, and select a desired server
from the list. To add a new time server, tap the
server name; to delete a time server that you have added, tap the
button.
By GPS
Select
Automatically connect to GPS to adjust time when World Time is
. This allows the device to connect to GPS and adjust time
started
automatically every time World Time is started.
5. Tap the
Adjust
NOTE: To perform time calibration in World Time by connecting to the Internet via the
ActiveSync connection right after you restore the device to the factory default state,
first check the Internet settings: tap
Connections
network setting and tap ok. Note that you should change the setting properly when
using other programs that require network connections.
8-10
soft key to synchronize the time.
Advanced Select Networks. Select My ISP as the private
Settings Connections
button next to the
Mio Programs