Synchronizing Directly With Exchange Server - Mio DigiWalker A501 User Manual

For information on setting ActiveSync options and using ActiveSync on
your desktop computer, see ActiveSync Help on the desktop computer. For
information on using ActiveSync on the device, see ActiveSync Help on the
device.
NOTE: If you use the GPRS Settings program to change the GPRS connection setting
while connecting the device to the desktop computer via the ActiveSync connection,
the device may be unable to automatically update the ActiveSync connection status.
Simply unplug the USB cable and then reconnect the cable for ActiveSync to update
the connection status.

Synchronizing Directly with Exchange Server

1. Connect the device to the Internet. (See section 10.1 for information on
installing GPRS settings using the GPRS Settings program.)
2. On the device, tap
3. Tap the
Menu
4. Enter the name of the server running Exchange Server, and tap the
soft key.
5. Enter your name, password and domain (if necessary), select the
check box (if you prefer automatic synchronization), and tap
password
the soft key.
Next
6. Select the check boxes for the types of information items that you want
to synchronize with Exchange Server.
7. Tap the
Finish
NOTE:
If a message pops up asking you to accept security policies for synchronization with
Exchange Server, tap OK to proceed.
You may be prompted to set the password for device lock. You can set a longer
period of time (maximum of 24 hours) before the device prompts you to enter the
password again.
More Programs
Programs
soft key
Add Server Source
soft key to save the settings.
.
ActiveSync
.
Next
Save
6-3