Camera Settings - Mio DigiWalker A501 User Manual

Camera Settings

Tap in the Camera mode to access related settings.
Item
7-6
Name
Sets the camera mode. The options are Auto
Mode
(default), Night, Sports, Indoor and Outdoor.
Sets the flash mode. The options are On, Off and
Flash
Auto (default).
Resolution Sets the resolution of the picture. The options are
1600X1200 (default), 1280X960, 800X600,
640X480 and 400X300.
Sets the delay time of the timer. The options are
Timer
5s, 10s and Off (default).
Continuous Sets if you want to take continuous pictures. (See
the "Taking Continuous Pictures" section for
information.)
Storage Sets if you want to save the pictures on the
Location device or SD/MMC card.
Effect Allows you to apply special effects on the
picture. The options are Normal (default), Sepia
and Mono.
Shutter Sets the sound when the shutter button is
Sound pressed.
Flicker Sets the flicker frequency to match that of the
Control fluorescent lamp.
GPS Stamp When this function is enabled, you can add the
GPS positioning data into the picture you take.
(See the "Adding the GPS Stamp into the
Picture" section for information.)
Reset Restores all camera settings to the default values.
Description
Camera