Navigation Bar - Mio DigiWalker A501 User Manual

4. Select to connect to the Internet or the
private network, and then tap the
soft key.
5. If the selected network requires a network
key, enter the key and tap the
key.
NOTE: To change the network settings, tap
Settings
Cards. Tap the desired network and change the
settings.
Starting and Ending a Wireless Network Connection
After you install the wireless network card and set up the wireless network,
use the desired program when you are within the range of wireless network.
For example, switch to Internet Explorer Mobile and browse to a web page.
Your device will automatically connect, and the

navigation bar.

To end the connection, remove the card from the device.
NOTE: When you have finished using the wireless network, complete the actions for
ending the connection. Leaving the wireless network module active will consume more
power.
10-4
Connect
Connections Network
Connect
soft
icon will appear on the
Getting Connected