E-Mail Direct Push; Setting Up An E-Mail Account - Mio DigiWalker A501 User Manual

E-mail Direct Push

Your device incorporates the Messaging & Security Feature Pack (MSFP).
When connected to the Exchange Server that supports Microsoft Exchange
2003 Service Pack 2 (or later), the device receives real-time notifications of
new e-mails via the Direct Push technology. New e-mails are automatically
downloaded to the device from the Exchange Server; you do not need to
check or download e-mails manually.
Before using the Direct Push feature, you need to set up a synchronization
relationship between the device and Exchange Server and complete the
initial synchronization. (See "Synchronizing Directly with the Exchange
Server" in section 6.1 for more information.)

Setting up an E-mail Account

You need to set up an e-mail account that you have with an Internet service
provider (ISP) or an account that you access using a VPN server connection
(typically a work account) before you can send and receive mail.
1. Tap
Messaging
2. Tap the
Menu
3. Enter your e-mail address, and tap
Auto configuration
so that you do not need to enter them manually.
4. Once
Auto configuration
5. Enter your name (the name you want displayed when you send e-mail),
user name and password.
6. Select the account type and name, and tap
7. Enter the server information, and tap
8. Decide if you want to download e-mail messages of the new account
immediately.
NOTE: You cannot add a new account while connected. Tap the Menu soft key
Stop Send/Receive to disconnect.
Microsoft Pocket Outlook
.
soft key
Tools
attempts to download necessary e-mail server settings
has finished, tap
.
New Account
.
Next
.
Next
.
Next
.
Finish
5-15