Configurations And Connections; Ananlogue Camera Connection; Network Configuration & Adding Ip Camera - Genie WAHD8162 Quick Start Manual

6.0 Configurations and Connections

6.1 Ananlogue Camera Connection

First connect the camera to the DVR.
Then go to Start → Settings → Camera→ Manage Camera → Camera Signal to checkmark the
video mode. Theactual signals input shall correspond to the video mode. Please refer to
the User Manual for details.
6.2 Network Configuration & Adding IP Camera
After you finish adding IP cameras, you can see the live images through the monitor of the
DVR. The following will mainly introduce how to add the IP cameras via LAN/WAN.
LAN
1.
2. Go to Start → Settings → Network → Port. Enter HTTP port (the default value is 80),
3. Click "Apply" to save the settings.
4. Go to Start → Settings → Camera → Add Camera. The DVR will automatically refresh the
10
Set the network of the DVR. Go to Start → Settings → Network → TCP/IP. Enter IP
address, subnet mask, gateway, etc. If using DHCP, please enable DHCP in both the
DVR and the router.
server port (the default port is 6036).
cameras searched. The IPC which supports the Onvif protocol may be added manually.
If the IPC searched is not in the same local network as the DVR, you should select the
device and click to modify the IP address.