Fluke VIBGUARD compact Manual page 40

Installation and Operation
#2: IEPE sensor via twisted pair cable
System module
All
All
Note: Cables with no signal on their screen must be insulated on the sensor side.
40
Terminal
13 to 24
28 to 33
Example for channel AI1
Terminal 13: Signal (+)
l
Terminal 14: GND (-).
l
Terminal 15: Screen (S).
l
Prepare the cable screen with the shield connection set (VIB
6.725-100).
IEPE-Sensor VIB 6.172 with sensor cable, e.g. VIB 3.570-6.
Instructions
Signal at plus (+),
l
GND at minus (-),
l
Screen at screen terminal (S)
l
Edition: 10.2018