Safety Markings - Fluke VIBGUARD compact Manual

Installation and Operation

2.3 Safety markings

Please refer to the following figure for the safety markings on the VIBGUARD compact. The safety markings must be
observed and must not be concealed or removed. For the variants that are installed in a control cabinet (VIB 7.xxx-
PS), the safety labels must be attached at a suitable point in the control cabinet.
1
VIB 7.900-LH
A yellow sticker each on the housing lock and below the power supply.
VIB 7.900-PS
A yellow sticker on the top hat rail.
2
VIB 7.900-LH
A yellow sticker on the outside of the cable gland for the mains supply.
VIB 7.900-PS
A yellow sticker on the top hat rail.
8
Vorsicht! Spannung Attention Danger
100 - 240V AC / 1,3 A / 50-60 Hz
Edition: 10.2018