2) Port information when using parallel port
The port information that can be set with the SetupPOS utility is as follows.
Item
Output buffer length [byte]
Output interval time [ms]
The default settings are as shown in the following table.
Item
Output buffer length [byte]
Output interval time [ms]
3) Port information when using USB port
The port information that can be set with the SetupPOS utility is as follows.
Item
Output interval time [ms]
The default setting is as shown in the following table.
Item
Output interval time [ms]
4) Port information when using Ethernet port
The port information that can be set with the SetupPOS utility is as follows.
Item
Output buffer length [byte]
Output interval time [ms]
The default settings are as shown in the following table.
Item
Output buffer length [byte]
Output interval time [ms]
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-H5000II/TM-U590)
Setting range
32 to 1024
0 to 9999
Setting range
Setting range
0 to 9999
Setting range
Setting range
32 to 1024
0 to 9999
Setting range
7
Version 3.00 Feb. 2019
1024
2500
2500
1024
2500