Epson TM-H5000II Series Development Manual page 6

Set DIP-SW2-2 in accordance with whether or not a customer display is
connected. If connected, set to ON. If not, set to OFF.
Set DIP-SW2-3 and DIP-SW2-4 (Specification of the print density) to match the
environment of use.
Make other settings in accordance with the settings described above.
•
For the TM-U590
DIP-SW2-3 and DIP-SW2-4 are not used. Fix them OFF.
2) Parallel Port
DIP-SW 1
No. Setting
1 OFF
2 OFF
3 OFF
4 OFF
5 OFF
6 OFF
7 OFF
8 OFF
It is possible to change the settings of DIP-SW1-1 (Auto line feed) and
DIP-SW1-2 (Specification of the received buffer capacity), but it is recommended
to leave them OFF.
Set DIP-SW2-3 and DIP-SW2-4 (Specification of the print density) to match the
environment of use.
Make other settings in accordance with the settings described above.
•
For the TM-U590
DIP-SW2-3 and DIP-SW2-4 are not used. Fix them OFF.
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-H5000II/TM-U590)
DIP-SW 2
No.
Recommended
Recommended
Fixed at OFF
Fixed at OFF
Fixed at OFF
Fixed at OFF
Fixed at OFF
Fixed at OFF
3
Version 3.00 Feb. 2019
Setting
1 OFF Settable
2 OFF Fixed at OFF
3 OFF Settable
4 OFF Settable
5 OFF Fixed at OFF
6 OFF Fixed at OFF
7 OFF Fixed at OFF
8 ON Fixed at ON