Interfaces; Interface Description - Bosch rexroth ctrlX CORE Operating Manual

18 / 50

Interface description

9

Interfaces

9.1 Interface description
X2, X3
Fig. 4: Interfaces
① and ④ are not enabled for the COREX-C-X2 variant.
NOTICE
Table 7: Control interfaces
No. Name Connection type
➀
XF01 USB host
USB 2.0
➁
XF10 Ethernet
10/100/1000 MBit
HMI and engineering port
➂
XF50 Ethernet
10/100/1000 MBit
Field bus master (Ethercat)
Bosch Rexroth AG
1
2
3
4
5
6
7
Damage of the device by plug mounting under voltage!
−
Before mounting or dismounting components, disconnect the control -
including its components - from voltage.
−
Connect the voltage only after the control and its components have been
set up.
Connector type
(integrated)
USB socket,
Type C
RJ45 socket
8-pin
RJ45 socket
8-pin
PLUS
X3
Mating connector and cable
(From outside)
USB plug,
Type C
RJ45 plug
(twisted pair, 8-wire)
RJ45 plug
(twisted pair, 8-wire)
R911405645, Edition 05
ctrlX CORE
8
9
10
X2 X3 X3
PLUS
‒ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓