Local Bus Interface Ethercat Of Ctrlx Core; Plus X3 - Bosch rexroth ctrlX CORE Operating Manual

ctrlX CORE
No. Name Connection type
➃
XF51 Ethernet
10/100/1000 MBit
1G Bit/s Ethernet (configurable)
TSN-capable (Time-Sensitive Networking)
➄
CF01 Slot for SD card
➅
XD10 24 V plug, U
➆
GB01 Battery case
➇
XF23 Ethernet
10/100 MBit Ethernet (configurable)
➈
XF24 Ethernet
10/100 MBit Ethernet (configurable)
➉
XD10 24 V plug U
9.1.1

Local bus interface Ethercat of ctrlX CORE

The local bus connected to the ctrlX CORE
the cycle time between 2 ms and 10 ms. The ctrlX CORE
I/O modules. The number of connectable modules depends on the total current consumption of the
ctrlX IO modules. The ctrlX CORE
The ctrlX CORE supplies the connected I/O modules with the logic voltage U
PLUS
voltage U . The voltages and currents fed in are measured internally and applied to the process data.
P
For U , only the current consumption of the infeed terminal and the I/O modules. For the integration
L
into the parent system, the respective ESI files are available. For the ESI files, go to
chrexroth.com/electrics.
Synchronizing the application
The application is synchronized in the "SM synchronous" mode.
R911405645, Edition 05
Connector type
(integrated)
RJ45 socket
8-pin
‒
2-pin
L
‒
RJ45 socket
8-pin
RJ45 socket
8-pin
, U 4-pin
L P
at the right is a 100 MBit/s LVDS Ethercat bus and
PLUS
can provide up to 3 A for the current supply of the modules.
PLUS
Mating connector and cable
(From outside)
RJ45 plug
(twisted pair, 8-wire)
SD card
2-pin
‒
RJ45 plug
(twisted pair, 4-wire)
RJ45 plug
(twisted pair, 4-wire)
4-pin
X3
PLUS
can be extended with up to 20 ctrlX
PLUS
L
⮫ http://www.bos-
19 / 50
Interface description
X2 X3 X3
PLUS
‒ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
‒ ‒ ✓
‒ ‒ ✓
‒ ‒ ✓
and the periphery
Bosch Rexroth AG