Status Display At The Power Connector Xd10 Ctrlx Core X2 And Ctrlx Core X3; Status Display At The Power Connector Xd10 Ctrlx Core; Plus - Bosch rexroth ctrlX CORE Operating Manual

38 / 50
Status displays
State
①
Errors (F0 – F7 ) in the ctrlX CORE Runtime Flashing red
App execution faulty
Service mode active
Identification
The ctrlX CORE Rescue system is active
Booting active or shut down
System error (F8 and F9
Runtime
① For the error codes, refer to:
⮫ https://docs.automation.boschrexroth.com/doc/2331677038/main-diagnostics/latest/en/
−
One square corresponds to a period of 200 ms.
−
The arrow represents the end of a cycle.
−
--: LED is not on.
−
BU: LED is blue.
−
GN: LED is green.
−
RD: LED is red.
−
WH: LED is white.
−
YE: LED is yellow.
A new status is only displayed when the previous flashing cycle elapsed. A change in status can
thus be delayed up to two seconds.
12.2.1 Status display at the power connector XD10 ctrlX CORE X2 and ctrlX CORE
X3
The voltage U applied at the connecting points is signaled via a green LED next to the respective red
L
pusher.
Off = Voltage not present
On = Voltage present

12.2.2 Status display at the power connector XD10 ctrlX CORE

The voltages U and U
L P
respective red pusher.
Off = Voltage not present
On = Voltage present
Bosch Rexroth AG
Color
Flashing red
Flashing blue
Flashing white
Flashing red and
blue
Flashing blue
①
) in the ctrlX CORE Red
applied at the connecting points are signaled via an own green LED next to the
-- -- --
RD RD RD RD RD
-- -- --
RD RD RD RD RD
-- -- --
BU BU BU BU BU
WH WH WH WH WH -- -- --
RD RD RD RD RD BU BU BU BU BU
-- -- --
BU BU BU BU BU
RD

PLUS

R911405645, Edition 05
ctrlX CORE
-- --
-- --
-- --
-- --
-- --