Tunturi FitRun 30 User Manual page 15

- Wear appropriate clothing and shoes�
- Keep clothing, jewellery and other objects away from the moving
parts�
- Make sure that only one person uses the equipment at a time� The
equipment must not be used by persons weighing more than 100
kg (220 lbs)�
- Do not open equipment without consulting your dealer�
Electrical safety
- Before use, always check that the mains voltage is the same as the
voltage on the rating plate of the equipment�
- Do not use an extension cable�
- Keep the mains cable away from heat, oil and sharp edges�
- Do not alter or modify the mains cable or the mains plug�
- Do not use the equipment if the mains cable or the mains plug
is damaged or defective� If the mains cable or the mains plug is
damaged or defective, contact your dealer�
- Always fully unwind the mains cable�
- Do not run the mains cable underneath the equipment� Do not run
the mains cable underneath a carpet� Do not place any objects on
the mains cable�
- Make sure that the mains cable does not hang over the edge of a
table�
- Make sure that the mains cable cannot be caught accidentally or
tripped over�
- Do not leave the equipment unattended when the mains plug is
inserted into the wall socket�
- Do not pull the mains cable to remove the mains plug from the wall
socket�
- Remove the mains plug from the wall socket when the equipment
is not in use, before assembly or disassembly and before cleaning
and maintenance�
⚠ CAUTION
• If voltage varies by ten percent (10%) or more, the performance
of your treadmill may be affected� Such conditions are not
covered under your warranty� If you suspect the voltage is low,
contact your local power company or a licensed electrician for
proper testing�
⚠ CAUTION
• Route the power mains cord away from any moving part of
the treadmill including the elevation mechanism and transport
wheels�
⚠ WARNING
• Never use water or any other liquid directly on or near the
equipment, but only via a damp cloth if moist is required to
clean the machine�
• Using liquid directly is harmful for the equipment's components,
and may result in an electric shock caused by a short cut circuit�
This could result in serious personal injury or even death�
Grounding Instructions
This product must be grounded� If the treadmill's electrical system
should malfunction or breakdown grounding provides a path of least
resistance for electric current, reducing the risk of electric shock� This
product is equipped with a cord having an equipment-grounding
plug� The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local codes
and ordinances�
⚠ WARNING
• Improper connection of the equipment-grounding conductor can
result in a risk of electric shock� Check with a qualified electrician
or serviceman if you are in doubt as to whether the product is
properly grounded� Do not modify the plug provided with the
product if it will not fit the outlet; have a proper outlet installed
by a qualified electrician�
Assembly instructions
Description illustration A
The illustration shows what the trainer will looks like after the
assembly is completed�
You can use this as a reference during your assembly, but do follow
the assembly steps always in the correct sequence as showed in the
illustrations�
Description illustration B
The illustration shows what components and parts you should find
when un-boxing your product�
‼ NOTE
• Small parts can be hidden/ packed in hollow spaces in the
Styrofoam product protection
• If a part is missing, contact your dealer�
Description illustration C
The illustration shows the hardware kit that comes with your product�
The hardware kit contains bolts, washers, screws , nuts etc� and the
required tools to properly fit your trainer�
Description illustration D
The illustrations shows you in the correct following order how to
assembly your trainer best�
‼ NOTE
• Part numbers shown in the assembly steps are commencing with
the spare part drawing that can be found in the online version
user manual�
⚠ WARNING
• Assemble the equipment in the given order�
• Carry and move the equipment with at least two persons�
⚠ CAUTION
• Place the equipment on a firm, level surface�
• Place the equipment on a protective base to prevent damage to
the floor surface�
• Allow at least 100 cm of clearance around the equipment�
• Refer to the illustrations for the correct assembly of the
equipment�
‼ NOTE
• Save the tools provided with this product, after you completed
the product assembly,
for future service purposes�
1 5
GB