Sleep Timer - Kenwood HM-582MD Instruction Manual

Be sure to adjust the clock before setting the timer.
To cancel execution of a timer program (Remote control unit only)
Press the TIMER key repeatedly until "PROG.1" or
"PROG.2" disappears.
To set the same timer program again (Remote control unit only)
Press the TIMER key repeatedly until "PROG.1" or
"PROG.2" appears.
Sleep timer (SLEEP)
The sleep timer is used to set the period after which the power will switch OFF automatically.
Press the SLEEP key during CD or MD playback or
during radio reception.
SLEEP
÷ The unit is turned OFF automatically after the set time has
elapsed.
÷ Pressing the SLEEP key once allows you to check the
remaining time. When checking the remaining time, it can
be fine adjusted (in 1-minute steps) using the VOLUME
keys on the remote control unit.
The system has been set so that the LCD bright-
ness drops automatically during the sleep timer
operation. (Auto dimmer)
After the timer has been set and power is off (timer standby), if there is a power failure or the power cord is unplugged from
Note Note Note
and plugged again into the power outlet, the
TIMER
TIMER
(Remote control unit only)
FM P08
BAYERN 3
AU TO
STEREO
÷ The reservation contents are held in memory.
FM P08
BAYERN 3
AU TO
÷ Also prepare the disc and adjust the listening volume.
÷ Each press increases the set time by 10 minutes. The sleep
timer can be set up to about 90 minutes.
10 =20=30 ....70 = 80= 90 = Cancel
S T
LEEP IMER
10min
TONE
12:30PM
TRACK
To cancel
Turn the power OFF or press the SLEEP key until
the sleep time is cancelled.
/timer indicator blinks in amber. In this case, set the clock again.
Contents
Timer operation
RDS
TONE
Goes off
A.P.S.
12:30PM
RDS
TONE
Lights
PROG 1
A.P.S.
12:30PM
S T
LEEP IMER
5min
\
\
TRACK
÷ Blinking starts when re-
maining time is 5 minutes
or less.
75
TONE
12:30PM