Playback Of Cd; Stop - Kenwood HM-582MD Instruction Manual

Contents
20

Playback of CD

Playback from
desired track
To fast forward
and backward
The label must be on top.
Do not touch the played surface.
Insert a disc in the insertion slot;
it will be pulled in automatically
into the deep of the unit.
2 2
To pause playback
To stop playback
Skipping tracks
1. Load/eject a disc.
Press the 0 key to eject the disc.
When taking the disc out of the unit, be sure to pull the disc straight out.
If the CD is pulled out in an oblique direction, the played surface may be
damaged.
÷ No adapter is necessary to play an 8 cm CD.
÷ Discs with certain special designs (transparent discs, etc.) may not be able to be
ejected by the first press. In such a case, try holding the 0 key depressed.
÷ If a disc cannot be inserted smoothly, try pushing it with a light force; this may
promote the automatic insertion of the disc.
The CD cannot be loaded or ejected while the unit is in standby mode.
Do not force load a CD in standby mode, otherwise malfunction will
result.
2. Start playback.
÷ After a few seconds, play starts from track No.1.
To pause playback
To stop playback
1 1
Skipping tracks
(The "CD" input is selected automatically.)
Track No. being played
(Upper line)
Elapsed track playing time
(Lower line)
Hearing sound
To eject
a disc
2 2
CD0001
‰
0:08
TRACK
FMFMF1:30
TONE
A.P.S.
12:30PM
R