Kenwood HM-582MD Instruction Manual page 66

Contents
66
3
Select the track title to be copied.
To return
P.CALL
4 ¢
4
Save it in the save destination title memo.
5
Press the TITLE INPUT key to complete editing.
TITLE INPUT
Copying title memo contents as the title of another disc or track
This editing operation is available by exchanging the parties (copy destination and copy source) in the proce-
dure of "Copying a Disc or Track Title in a Title Memo (TITLE COPY)". After performing steps 1 to 5 in the
procedure on page 65, change steps 1-
ing these two steps.
Step 1-
2
Select a disc or track title as the destination in place of the title memo.
Step 3
Select a title memo ([1] to [3]) as the copy source.
The title memo itself can also be edited.
÷ After performing step
in the same title memo by repeating steps
Notes Notes Notes
÷ After performing step
by pressing the 4 or ¢ key then performing the character input operation in step 2 in "Assigning a title to a disc
or track".
To advance
SET
\
\
ENTER
and 3 as shown below. The input can be repeated by simply perform-
2
3
in "Copying a disc or track title in a title memo (TITLE COPY)", additional titles can be saved
3
in "Copying a disc or track title in a title memo (TITLE COPY)", the copied title can be edited
Select track No. 7 "A. Songs".
[007]A.Song
The title is scrolled.
÷ It is also possible to copy additional titles to the same title
memo by repeating steps
[1]
STORE
÷ "A. Songs" is memorized in title memo No. [1] which was
selected in step 1.
2 3
1
- and for each title.
MD Edit Functions
Set the selection.
[007].Songs
A.Songs
TONE
1 3
-2 to .
TITLE
\
\
[1]A.Songs
TONE
TONE
TONE