Bagging The Clippings - Toro Recycler 21772 Operator's Manual

If the grass bag is on the machine and the
bag-on-demand lever is in the bagging position, move

Bagging the Clippings

Use the grass bag when you want to collect grass and leaf clippings from the lawn.
If the bag-on-demand lever is in the recycling position, move it to the bagging position; refer to
Bag-on-Demand Lever (page
Installing the Grass Bag
1. Raise and hold up the rear deflector (A of
2. Install the grass bag, ensuring that the pins on the bag rest in the slots on the handle bracket (B of
Figure 20).
3. Lower the rear deflector.
Removing the Grass Bag
To remove the bag, reverse the steps in
17).
Figure
Installing the Grass Bag (page
the lever to the recycling position; refer to
the Bag-on-Demand Lever (page
20).
Figure 20
16).
16
Operating
17).
Operating the
g334207