Starting The Engine; Using The Self-Propel Drive; Shutting Off The Engine; Engaging The Blade - Toro Recycler 21772 Operator's Manual

Table of Contents

Advertisement

Starting the Engine

Figure 13
Note:
If the machine does not start after several
attempts, contact an Authorized Service Dealer.

Using the Self-Propel Drive

To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the machine will automatically keep pace
with you
(Figure
14).
Figure 14
Note:
If the machine does not freely roll backward
after self-propelling, stop walking, hold your hands
in place, and allow the machine to roll a couple of
centimeters (inches) forward to disengage the wheel
drive. You can also try reaching just under the upper
handle to the metal handle and pushing the machine
forward a couple of centimeters (inches). If the
machine still does not roll backward easily, contact an
Authorized Service Dealer.

Shutting Off the Engine

Service Interval: Before each use or daily—Ensure
To shut off the engine, press and hold the
engine-shutoff button
shuts off.
g352922

Engaging the Blade

When you start your engine, the blade does not turn.
You must engage the blade to mow.
1.
Pull the control-bar lock back
g334136
2.
Pull the blade-control bar to the handle
17).
14
that the blade stops within 3 seconds
after releasing the blade-control bar.
(Figure
16) until the engine
Figure 15
(Figure
Figure 16
g236566
16).
g003123
(Figure

Advertisement

Table of Contents
loading

Table of Contents