Folding The Handle - Toro Recycler 21772 Operator's Manual

Folding the Handle

WARNING
Folding or unfolding the handle improperly can damage the cables, causing an unsafe
operating condition.
• Do not damage the cables when folding or unfolding the handle.
• If a cable is damaged, contact an Authorized Service Dealer.
1. Remove and save the 2 handle knobs and 2 carriage bolts from the handle brackets (A of
Important:
Route the cables to the outside of the handle knobs as you fold the handle.
2. Fold the handle by rotating it forward (B of
3. Loosely install the handle knobs and carriage bolts on the handle brackets (C of
4. To unfold the handle, refer to
Figure 24).
1 Assembling and Unfolding the Handle (page
Figure 24
19
Figure 24).
Figure 24).
5).
g334460