Removal Of Seat Base; Install Cup Holder - DJG Intera Base Only Instruction Manual

4538-3439C Intera Base 7/19/05

Removal of Seat Base

Base must be removed from seat for use as a
Belt-Positioning Booster for both high back and
backless booster use.
1
2
5:04 PM Page 13
A
Push on tab on either side of
base (A) located by metal bar.
From the other side, push on
bar and pull the bar completely
out.
Lift shell off base. Save the bar
for future use by replacing the
bar.
10

Install Cup Holder

1
2
Remove seat from base (See the
section "Removing Seat Base")
Squeeze buttons on left arm
rest and swing arm rest up.
Remove screw.
Place cup holder on shell.
Secure cup holder to base with
screw. Swing arm back down
and lock securely in place.
11