Advertisement
OPERATION
Switch on the appliance:
By turning the correct knob (5) activate the selected cooking zone (1, 2, 3, 4). Pilot light (6)
will come on. You can now set the heat setting by turning the knob in the desired position.
The heating elements are controlled by knobs allowing you to set the appropriate heat set-
ting. The system uses the power effectively according to your needs, without causing a loss.
Please kindly note the following:
•
do not operate a cooking zone without cookware,
•
use only the cookware with clean and dry base,
•
never cook food in plastic cookware,
•
do not put plastic items (spoons, forks, etc.) on a hot cooking zone
•
always use cookware with a lid, and make sure that lid does not protrude outside the pot's
rim and condensation does not leak on the hob,
•
protect cooking zones against corrosion,
•
turn off the cooking zones 5 - 10 minutes before removing cookware.
Fig.6
Symbols on the knobs correspond to cooking zones which they control.
The cooking zone is off if:
• "0" on the knob is aligned with the vertical line marked on the control panel.
• marking on the knob is aligned with „0" on the control panel.
The heat setting can be adjusted by turning the knob left or right. When cooking
zone operates, a pilot light is on.
15
Advertisement
