Related Manuals for CDA PEB4.7SVR
Summary of Contents for CDA PEB4.7SVR
- Page 1 PEB4.7SVR HE6052SS INSTRUCTION MANUAL CERAMIC COOKER IO-HOB-1249 / 8508927 (11.2020 / v2)
-
Page 2: Basic Information
DEAR USER, The plate is exceptionally easy to use and extremely efficient. After reading the instruction manual, operating the cooker will be easy. Before being packaged and leaving the manufacturer, the plate was thoroughly checked with regard to safety and functionality. Before using the appliance, please read the instruction manual carefully. -
Page 3: Table Of Contents
TABLE OF CONTENTS Basic information ....................2 Safety instructions ....................4 Saving energy .......................8 Description of the appliance................9 Specification......................9 Installation......................10 Operation ......................1 4 Cleaning and routine maintenance ..............1 7... -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS Warning: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or... - Page 5 SAFETY INSTRUCTIONS Warning: If the surface is cracked, switch off the ap- pliance to avoid the possibillity of electric shock. Metallic objects, such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. After use, switch off the hob element by its control and do not rely on the pan detector.
- Page 6 SAFETY INSTRUCTIONS ● Before using the ceramic plate for the first time read the Operating Manual carefully as thus you can ensure safe operation and avoid damage to the plate. ● If the ceramic plate is operated near a radio, TV set or other emitting device, please check whether the touch panel works correctly.
-
Page 7: Cleaning And Routine Maintenance
SAFETY INSTRUCTIONS ● The heating surface of the ceramic plate is resistant to thermal shock. It is neither hot nor cold-sensitive. ● Avoid dropping objects on the plate. A point hit, for example a falling bottle with spices, may in unfavourable circumstances lead to cracks and splits appearing on your ceramic plate. -
Page 8: Saving Energy
SAVING ENERGY UNPACKING Everybody who properly The appliance is protected from damage during transpor- uses energy not only saves money but also consciously tation by its packaging. After unpacking please dispose acts in aid of the natural of the packing materials in a environment. -
Page 9: Description Of The Appliance
DESCRIPTION OF THE APPLIANCE Description 1,2,3,4 – cooking zones 5 - knobs 6 - pilot light Specification: - rated voltage ~230V, 50 Hz - 1 - cooking zones - normal Ø 180 – 1500 W Ø 145 – 1000 W - fast cooking zones Ø145 –... -
Page 10: Installation
INSTALLATION Making the worktop recess • Worktop thickness should be 28 - 48 mm, while its width at least 600 mm. The worktop must be flat and level. Edge of the worktop near the wall must be sealed to prevent ingress of water or other liquids. - Page 11 INSTALLATION Note. When installing the hob in the kit- chen worktop, install a partition panel, as shown on the picture. If the hob is to be installed above a built-in oven, instal- lation of the partition panel is not requ- ired.
- Page 12 INSTALLATION Installing hob - bracket • Use four “A” brackets for 48 mm thick worktops. Fit the hob into worktop opening as shown on figure 2 and 3. To properly secure hob in 28 and 38 mm thick worktop, use four “B” brackets.
- Page 13 INSTALLATION Electrical connection Connection diagram Caution! Voltage of heating elements 230V. Caution! In the event of any connection the safety Warning! wire must be connected to the PE terminal. All electrical work should be carried out by a suitably qualified and authorised electrician. No alterations or wilful changes in the electric- ity supply should be carried out.
-
Page 14: Operation
OPERATION Before using the appliance for the first time ● Thoroughly clean your ceramic hob first. The ceramic hob should be treated with the same care as a glass surface. ● Switch on the ventilation in the room or open a window, as the appliance could emit an unpleasant smell during first use. - Page 15 OPERATION Switch on the appliance: By turning the correct knob (5) activate the selected cooking zone (1, 2, 3, 4). Pilot light (6) will come on. You can now set the heat setting by turning the knob in the desired position. The heating elements are controlled by knobs allowing you to set the appropriate heat set- ting.
- Page 16 OPERATION Knob Examples of cooking application setting rapid heating, cooking, frying frying meat and fish simmering or frying cooking soups and large quantity of food cooking potatoes stewing vegetables Remarks on the use of cooking zones Depending on the type, the hob may be fitted with standard or fast cooking zones. Cooking and frying on the standard and fast cooking zones Fast cooking zone has greater power than standard cooking zone.
- Page 17 CLEANING AND MAINTENANCE Proper routine maintenance and cleaning of the appliance can significantly extend its trouble-free operation. Before cleaning, turn off the hob (all knobs set to „0”) and wait until it cools down. Wipe with a soft cloth and a small amount of detergent. Never use abrasive or caustic cleaning agents.
- Page 18 Directive of the European Parliament and Council Directive 2009/125/EC with regard to eco -design requirements for household ovens, hobs and range hoods Household gas hobs HE6052SS Model identifier PEB4.7SVR 21340 Hob type (electric / gas / gas -electric) V / O / O Number of cooking zones...