Fujitsu Waterstage Split Comfort 5 Series Installation Manual page 41

Ref. Functions
1 Selecting the DHW operation
2 Digital display
3 "ESC" output
4 Navigation and setting
5 Selecting the heating operation
6 Displaying information
7 Validation "OK"
8 Selection of the Cooling mode*
9 Reset
(Press and relief)
10 Setting button
11 Presence button
* according option
Waterstage Split Comfort DHW Serie / INSTALLATION / 2125 - EN
- Defi nition of the functions
- Start: Production of DHW in function of the timer programme.
- Stop: Production of the DHW stopped with antifreeze function of the
domestic water active.
ON
Marche
- Manual start button: Press the DHW button for 3 s
(switches from "reduced" to "comfort" until the DHW timer programme is
switched again).
Arrêt
OFF
- Check the operation, read the current temperature of the heating operation,
or a possible fault.
- View the settings.
- Exit the menu.
- Setting the comfort temperature value.
- Menu selection
- Setting the parameters.
Auto
- Service heating according to the heating programme
(automatic summer/winter switching).
- Permanent comfort temperature.
- Permanent reduced temperature.
- "Stand-by" operation with antifreeze protection
(provided that the electrical power supply of the heat pump is not interrupted).
- Miscellaneous information (see
- Reading the error codes (see
- Information on maintenance, special operation.
- Enter the selected menu.
- Validate the parameter settings.
- Validate the comfort temperature value setting.
- Service cooling according to the heating programme
(automatic summer/winter switching).
- Reset the parameters and cancel the error messages.
Do not use during normal operation
- Setting the comfort temperature value.
- Comfort / reduced switching.
"Information display", page
page 66).
64).
- 41 -