Installation Of The Outdoor Unit - Fujitsu Waterstage Split Comfort 5 Series Installation Manual

►

Installation of the outdoor unit

▼ Installation precautions
The outdoor unit must only be installed
outside. If a shelter is required, it must have
broad openings on all 4 sides and installation
clearances must be observed.
• Choose the location of the appliance after discussion
with the client.
• We recommend choosing a site that is sunny but
sheltered from strong cold prevailing winds.
• The unit must be easily accessible for future installation
and maintenance work
• Ensure that connections to the hydraulic unit can be
made easily.
• The outdoor unit is able to withstand bad weather but
avoid installing it in a position where it is likely to be
exposed to signifi cant dirt or fl owing water (e.g. under
a broken gutter).
■ Models 5, 6 & 8
A 100 mm
B 200 mm
C 250 mm
D 300 mm
E 400 mm
F 500 mm
G
C
H
B
F
fi g. 16 - Minimum installation clearances around the outdoor unit (model 5, 6 & 8)
Waterstage Split Comfort DHW Serie / INSTALLATION / 2125 - EN
(fi g. 16 and fi g. 17, page
G 600 mm
H 1000 mm
J 1500 mm
K 2000 mm
L = 200 mm max
M = 300 mm max
A
G
B
H
A
• Water may fl ow out of the outdoor unit when it is
operating. Do not install the outdoor unit on a paved
terrace; choose a well-drained location (e.g. gravel or
sand). If installation is carried out in an area where the
temperature stays below 0°C for long periods, check
that the presence of ice does not present any danger.
A drain pipe can also be connected to the condensate
drain pan (optional)
• Nothing should obstruct the air circulation through the
evaporator and out from the fan
page 18).
18).
• Keep the outdoor unit away from heat sources and
fl ammable products.
• Make sure that the unit does not disturb the
surrounding area or inhabitants (noise level, draught,
low temperature of the ejected air freezing the plants
in its path.
A
L
G
A
B
H
B
K
E
H
(fi g. 18, page 19).
(fi g. 16 and fi g. 17,
A
C
L
A
C
M
C
J
C
B
C
H
A
G
A
J
B
B
- 17 -