MICROBOARDS TECHNOLOGY, LLC
Using SureThing Disc Labeler
SureThing Disc Labeler is included with the GX-2 Disc Publisher and will be installed during the GX-2
Installation. For more information on using SureThing, please refer to the SureThing Help menu.
Creating New Labels
Any label you create in SureThing must use the Microboards template to print correctly.
1. To create a new label, either click New Project in the Action window on the left, or select New
from the File menu.
2. Click the Select Label button on the lower left corner of the dialog to view the available label
templates if the dialog does not appear as shown to the right.
3. Highlight CD/DVD Printers in the Media Type column.
4. Highlight Microboards in the center Manufacturer column.
5. Select from the options listed in the Label Type column.
We recommend that you use the 17mm inner hole template to ensure that your image will
fully cover the printable surface on both hub printable and non-hub printable media,
adjusting the Diameter Settings when changing between media types (see page 16).
6. Click OK to begin designing the label. For assistance in using SureThing, press the F1 key while
SureThing is open for help.
19
GX-2 DISC PUBLISHER