Technical Specs And Terminal Configuration - Siemens SICAM Q80 Operating Instruction

Power quality recorder

Hide thumbs Also See for SICAM Q80:

Table of Contents

Technical specs and terminal configuration

Operating conditions

Unless otherwise stated, the following conditions must be met for use of SICAM Q80 7KG8080:

use indoors

altitude up to 2000 m NN

operating temperature range of -10 °C through 55 °C without condensation

maximum relative humidity: 80 % for temperatures up to 31 °C, decreasing linearly to 50 % relative humidity at

40 °C

in case of power supply from the power grid, voltage fluctuations of no more than ±10 % from the nominal value

(for other power supplies, the respective voltage fluctuation limitations apply)

transient voltage surges conforming to overvoltage categories II and III. For power supply from the grid, the

lowest and most common overvoltage category II is to be applied.

Pollution degree 1 or 2 in accordance with IEC 60664

Technical specs and terminal configuration

Power Quality Recorder SICAM Q80 7KG8080, Operating instruction

E50417-B1074-C419-A2, Release 12.01.2015

E-69

Table of Contents